Two external eSATA connector
Includes Low Profile and Regular size PCI Brackets
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
Two high speed Native Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s
Fully compliant with Serial ATA 1.0a specifications
Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives
Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
Two Pin header on board for LED connection
Jumper enable / disable on board SATA BIOS
Supports Spread Spectrum in receiver
Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
Compliant with PCI Specification, revision 2.2
Integrated PCI DMA engines
32 bit, 33/66MHz fully compliant PCI host interface
Fully RoHS compliant
Completely with drivers for Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000, Windows 2003, XP, and Vista 32/64
Support Win8 32 bit only
Chipset : SiI3512
* HDD Controllers are capable to support all HDD sizes, but different OS may limited the HDD sizes that can be supported. For example, XP 32-bit supports only up to 2TB.
* This Model supports Optical Drive (SATA CD/DVD-ROM including Blu-ray drives.)
* Please avoid using "Green" drives to build the RAID. These types of drives have slower spin up time and tend to enter power saving mode aggressively. The RAID controller would assume the drives as either dropped or damaged because of time out, and the whole RAID set will become degraded or even unusable.
Click Here for California Proposition 65 Warning.